Transportation: Contact Us
Payment Type: Contact Us
Before cleaning, the surface temperature of the car body should be cooled to below 60 ℃, and the ambient temperature should be maintained at 0-40 ℃. The water gun should be at least 15 centimeters away from the paint surface of the vehicle. The washing sequence is from the roof to both sides. When washing the front grille of the car, a mist like water flow should be used, and a water column should not be used to flush the radiator or condenser fins. If a plastic arch cover is installed at the mudguard, it should be removed for cleaning, and the inside of the mudguard and fender should be thoroughly cleaned.
1. It is to remove stubborn marks left on the car body. You can use all-purpose descaling water and a dust-free cotton cloth to carefully scrub, then wring out a dust-free cotton cloth dipped in car wash solution, and wipe the car wash solution on the paint surface of the car body in a direction perpendicular to the direction of driving.
Finally, rinse the car wash thoroughly with sufficient water and promptly wipe off the moisture with a synthetic sheepskin towel. Wipe dry to ensure that there is no water stains on the entire vehicle and no stains on the glass
2. High pressure water gun cleaning is the process of using a high pressure water gun to wash away the mud and sand on the surface of the vehicle from top to bottom, then rinse the rear of the vehicle, and finally wash the lower part of the vehicle. In this step, it is important to thoroughly flush the chassis and clean the edges, bends, mudguards, and other areas. Especially, the wheels, brake discs, fenders, front grille, door frames, and skirts should be thoroughly cleaned of mud and dirt.
3. It's wiping. Dip a car wash sponge in shampoo car wash solution and wipe the car body once. If the contamination is not easy to remove, it can be wiped repeatedly. Pay attention to using separate sponges to wipe the upper and lower parts of the car body to prevent sand particles from scratching the paint surface of the car body. Then wash it with high-pressure spray, especially the foam and other residues at the joints and corners of the car.
4. Apply liquid and sprinkle shampoo car wash onto the vehicle body. There are two methods. One is to use a multi-function high-pressure foam cleaner, which should be evenly sprayed and shake the nozzle regularly up and down; The second is manual preparation, which involves preparing shampoo car wash according to a certain proportion, and does not use laundry detergent, soapy water, or dewaxing detergent.
Project parameter notes
Vehicle model DKV5180GQXE6
Wheelbase (m m 4700
Engine models B6.2NS6B210, B6.2NS6B230 National VI emissions, diesel engine
Engine power (kW) 154KW/169KW
External dimensions (length x width x height) (mm) 79007930X2550X3200
Curb weight (kg 8460
Maximum total mass (kg 18000
Working speed (km/h) Engine speed r/min Working in neutral position
Effective volume of the box (m3) 10 cubic meters
Manual operation mode
Contact Now